How to Stop Emails Going to Spam in Gmail When Sending in Bulk
Updated
To stop emails going to spam in Gmail, authenticate your domain with SPF, DKIM and DMARC, keep reported spam below 0.1% (never 0.3%), add one-click unsubscribe, and only email people who expect to hear from you. Remove invalid addresses before sending, send at a steady pace rather than in one burst, and write short plain emails without tracking images or hidden content.
Gmail decides where an email lands based on who sent it, whether that sender can prove it, how recipients have reacted to the sender’s mail before, and what the message looks like. You control most of those inputs. This guide covers each one, starting with the rules Google publishes.
What Google requires from senders
Since February 2024, Google has published requirements for anyone sending to personal Gmail accounts. From November 2025, Google says it ramped up enforcement, with messages that don’t comply facing temporary and permanent rejections.
For all senders, Google requires:
- SPF or DKIM authentication for your sending domain
- valid forward and reverse DNS for sending servers
- a TLS connection
- a spam rate, as reported in Postmaster Tools, below 0.3%
- messages formatted to the RFC 5322 standard
- no impersonating Gmail in the From header
Senders of around 5,000 or more messages a day to personal Gmail accounts are classed as bulk senders, and must also:
- use SPF and DKIM, plus DMARC
- align the From domain with the SPF or DKIM domain
- support one-click unsubscribe for marketing and subscribed messages, with a visible unsubscribe link in the body
Google’s FAQ says bulk sender status doesn’t expire, and that messages from the same primary domain count together towards the 5,000 figure. A small business sending 300 outreach emails a day isn’t a bulk sender, but following the bulk rules anyway costs little and helps with every inbox provider.
Set up SPF, DKIM and DMARC for your domain
If you send from an @gmail.com address, skip this section: you can’t add records for gmail.com. If you send from your own domain through Google Workspace, such as hello@yourbakery.co.uk, these three DNS records are the foundation of deliverability.
SPF
SPF lists the servers allowed to send email for your domain. Google’s recommended record for a domain that only sends through Workspace is:
v=spf1 include:_spf.google.com ~all
Add it as a TXT record at your domain provider. If other services send mail for your domain, such as your website’s contact form or an invoicing tool, they need adding to the same record. Google says SPF can take up to 48 hours to start working.
DKIM
DKIM adds a digital signature to each email so receiving servers can check it wasn’t altered and really came from your domain. In Workspace:
- In the Admin console, go to Apps > Google Workspace > Gmail > Authenticate email.
- Select your domain and click Generate new record. Use a 2048-bit key if your domain provider supports it.
- Add the TXT record it gives you at your domain provider.
- Return to the Admin console and click Start authentication.
Google says DKIM can take up to 48 hours to start working after you add the record.
DMARC
DMARC tells receiving servers what to do with mail that fails SPF and DKIM, and sends you reports. Google advises waiting 48 hours after SPF and DKIM are working, then adding a TXT record at _dmarc.yourdomain.co.uk. A minimal starting record looks like this (Google’s own example adds pct and strict alignment tags):
v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.co.uk
Start with p=none, which only monitors. Once the reports show your legitimate mail passing, Google recommends moving to quarantine and then reject. Send the reports to a dedicated mailbox or group rather than your personal inbox, as there can be a lot of them.
Keep spam complaints low
Spam reports matter more than anything else on this page. Google asks senders to stay below 0.3% and recommends below 0.1%, which is one complaint per 1,000 emails. Google’s FAQ adds that senders above 0.3% aren’t eligible for mitigation until they’ve had seven consecutive days below it.
The way to keep complaints low is to email people who have a reason to hear from you. A design agency writing to 80 businesses it has worked with will get far fewer complaints than one writing to 2,000 contacts from a downloaded directory, however good the email is. Check the legal side too: our guide to whether cold emailing is legal in the UK covers who you can contact without consent.
Make unsubscribing easy
Someone who can’t find an unsubscribe link will often press “Report spam” instead, and that counts against you.
One-click unsubscribe uses two email headers defined in RFC 8058: List-Unsubscribe, containing an unsubscribe URL, and List-Unsubscribe-Post: List-Unsubscribe=One-Click. Google’s FAQ says mailto links or plain URL links alone don’t meet the requirement, and recommends processing unsubscribes within 48 hours.
Replyable adds both headers to every email, plus a short footer with your name, postal address and an unsubscribe link, and stops any remaining follow-ups for that person immediately.
Clean your list before every send
Bounces tell Gmail and other providers that you don’t know who you’re writing to. In large numbers they can also block your account: Gmail’s help page says that if many of your messages can’t be delivered, you may have to wait 24 hours to send again.
Before each campaign, remove:
- addresses with invalid syntax or typos
- duplicates
- role addresses such as noreply@, postmaster@ or abuse@
- domains that have no mail server
- anyone who unsubscribed or bounced before
Replyable runs all of these checks when you paste in a list, including a DNS lookup for each domain’s mail server, and leaves failed contacts out. It also pauses a campaign automatically if, after 20 sends, bounces go above 3%, unsubscribes above 5%, or Gmail rejects more than 5% of messages, so a bad list stops before it does lasting damage.
Send at a human pace
Hundreds of messages in a few seconds is a pattern people don’t produce. Spread sends out: a few a minute, during working hours, and within your account’s daily limit. Our guide to Gmail sending limits has the numbers for free Gmail and Workspace.
New domains and new Gmail accounts need more care. Start with small batches to people likely to reply, and increase volume over a few weeks rather than sending your whole list on the first day.
Write emails that look like normal email
Google’s guidelines include several points about the message itself:
- don’t hide content with HTML or CSS
- make links visible and clear about where they go
- make subject lines and headers accurate, and don’t add “Re:” or “Fwd:” unless the message really is a reply or forward
- don’t mix different types of content, such as promotions inside a receipt
- don’t use emojis or unusual characters to imitate graphics in a misleading way
For outreach, plain is better. A short email with no images, one link at most, and a normal signature looks like what it should be: one person writing to another.
| Looks like personal email | Looks like a campaign |
|---|---|
| Plain text or light formatting | Heavy HTML templates and banners |
| One link, or none | Several tracked links |
| No images | Logos, header images, tracking pixel |
| Specific opening line | “Dear valued customer” |
| Sent from a named person | Sent from marketing@ or noreply@ |
Leave open tracking off
Open tracking works by adding a tiny remote image to each email. It adds nothing for the reader, and Apple’s Mail Privacy Protection stops senders seeing whether a message was opened, so the figures are unreliable for a large share of recipients. Replies are a better measure for outreach. Replyable offers open tracking only on paid plans and leaves it off by default.
How to stop emails going to spam in Gmail if it’s already happening
- Check your domain’s SPF, DKIM and DMARC records are in place and passing. Open one of your emails in Gmail, click More next to Reply, choose Show original, and look for spf=pass and dkim=pass in the header.
- Set up Google Postmaster Tools for your domain and watch the spam rate.
- Pause sending to cold contacts and send only to people who know you for a couple of weeks.
- Clean the list and remove everyone who hasn’t engaged.
- Rewrite the email to be shorter and plainer.
Summary
Authenticate your domain, email people who expect to hear from you, make unsubscribing easy, keep the list clean, and send at a steady pace. If you want those safeguards handled from inside Gmail, you can install Replyable. Daily limits and open-tracking options by plan are on the pricing page.
Questions people ask
Why are my emails going to spam in Gmail?
The common causes are missing SPF, DKIM or DMARC records, recipients marking your emails as spam, sending to addresses that bounce, and messages that look like bulk marketing. Google's sender guidelines list the requirements.
Do I need SPF, DKIM and DMARC if I send from Gmail?
If you send from an @gmail.com address, you can't add DNS records for gmail.com. If you send from your own domain through Google Workspace, you set SPF and DKIM for it, and DMARC is required once you send around 5,000 or more messages a day to personal Gmail accounts.
What spam rate does Google allow?
Google asks all senders to keep the spam rate reported in Postmaster Tools below 0.3%, and recommends staying below 0.1%.
Does open tracking hurt deliverability?
A tracking image adds a remote image to an otherwise plain email, and Apple Mail Privacy Protection hides whether people opened a message, so the data is unreliable. For one-to-one outreach it is usually better left off.
Sources
- Email sender guidelines (Google Workspace Admin Help)
- Email sender guidelines FAQ (Google Workspace Admin Help)
- Set up SPF (Google Workspace Admin Help)
- Set up DKIM (Google Workspace Admin Help)
- Set up DMARC (Google Workspace Admin Help)
- Gmail sending limits (Gmail Help)
- Check if your Gmail message is authenticated (Gmail Help)
- Use Mail Privacy Protection on iPhone (Apple Support)